-
-
| |
|
Products |
Areas of Application:
-
AQ Plus™
-
MSDS PDF
-
This
BOC product is designed to clarify water and assist in the breakdown of
the organic binders which cause inorganic minerals to form scaling. This
formulation rapidly degrades the organic contaminants which helps
substantially reduce the requirements of harsh chemicals, such as
chlorine. Applications include pools, spas, ponds, lakes, rivers, and
eliminating scaling problems in water systems.
Dilution
rates vary with water conditions, with pool water use being at the level
of 1-2 ounces per 1000 gallons of water, once a week. Dosages may be
increased, based upon contaminant load factors.
back to list
-
EcoSystem Plus™
-
MSDS PDF
-
PDF
explaining more about EcoSystem Plus™
-
This BOC product is for
use in all wastewater applications, including municipal and industrial
wastewater facilities, agricultural and animal waste lagoons, and other
contaminated water systems.
-
-
Dilution rates are
based upon the wastewater biological oxygen demand (BOD) levels, with
dosage amounts of EcoSystem Plus being added at 1.0 parts per million (ppm)
for every 100 BOD.
back to list
-
NONTOX™
-
MSDS PDF
-
This
BOC product is designed specifically for use in treating hydrocarbon
contamination in water and soil by enhancing their biological breakdown
and degradation to safe levels. One particular benefit of this
formulation is the rapid reduction of highly volatile hydrocarbon
components.
-
-
Dilution
rates vary depending on whether contamination occurs in soil or water.
For soil, a mixture of 30 ounces of
NONTOX™
added to
4 gallons of water, which is applied directly to the soil, treats
approximately 1 cubic yard of contaminated soil. In water, the
recommended dosage rate is 1 gallon of
NONTOX™
mixed
into 15 gallons of salt or fresh water, which will treat approximately
10,000 square feet of an oil slick.
back to list
-
EcoCatalyst™
-
MSDS PDF
-
SPEC SHEET
PDF
-
LABEL JPG
-
This
BOC product is designed to eliminate the fats, oils and greases (FOGs)
that clog pipes, drains, collection and septic systems. Regular use of
this formulation will keep sewers, grease traps, drains, garbage
disposals, wet wells, pump stations, and septic systems free-flowing and
odorless.
-
-
Dilution
rates will vary depending upon the water flow volumes and turbulence
within the collection system. It is possible to add EcoCatalyst™
at less than 1 ppm in cases of high water flow volumes and turbulence,
however, increased dosages are recommended with lower water flow
volumes. In cases where drains or grease caps are present, EcoCatalyst™ should be
injected through a high pressure spray system, or injected so that it
takes advantage of the location’s hydrodynamics.
 |
click
on picture for large version |
back to list
-
MC 501™
-
MSDS PDF
-
This
BOC product is designed to effectively remove FOGs and other organic
contaminants from surfaces or within containers, replacing the use of
chemical solvents, caustics, and other dangerous chemicals in most
industrial and commercial applications of cleaning.
-
-
Dilution
rates vary from mixing 2 ounces of MC 501TM per 1 gallon of water in
general cleaning applications, up to 2 ounces of MC 501 per 100 gallons
of water for use within high pressure water systems.
back to list
-
PhytoZyme™
-
MSDS PDF
-
This
BOC product is designed for use in agricultural applications for soils,
crops, turf and landscaping. These benefits include improvement of
moisture penetration and retention, and increasing the soil’s ability to
release nutrients by solubilization and enhancement of microbial
activity.
Dilution
rates are based on applying approximately 1 gallon of
PhytoZyme™
for every 2,000 square feet of soil. Depending upon soil conditions,
PhytoZyme™ is applied
every other month. In case of heavy, less permeable clay type soils,
multiple applications are recommended.
back to list
-
-
-
Eccomate™
-
MSDS PDF
-
This
BOC product is designed for use in applications where the elimination of
odor is required. This is not a masking agent, but quickly oxidizes
odor causing molecules, thus eliminating the source of odors.
Dilution
rates vary upon the application, with a general recommendation of 6
ounces of Eccomate added to one gal. of water for sprayed on for most
uses. This dilution is primarily for industrial and commercial
applications where odors are quite strong, lower dilution levels are
recommended for most residential uses.
back to list
-
Packaging
-
The
entire Bio-Organic Catalyst (BOC) line of proprietary
compositions are produced in a highly concentrated liquid form. They
are packaged in industry standard 1 gal. jugs, 5 gal. pails and 55 gal.
drums. Due to the documented safety of these product formulations, they
can all be shipped by UPS or US Post Office.
back to top
|
|
Home|SiteMap|Company|FAQs|Technology|Applications|Products|Connect|News|Links |
|
®
®
